TECHNICAL INFORMATION

Brick veneer

Key information for designing and building in brick veneer including brick maintenance.

Designa Schist

Key information for designing and building in Schist brick veneer.

Clay Veneer

Key information for 2 Storey Clay Veneer construction.

Fire Ratings

Fire Resistant Ratings.

Technical Drawings

Architects and Designers – download our technical drawings below.

TECHNICAL DRAWINGS

Please note these files require Adobe Acrobat Reader or AutoCad software. They can be viewed in DWG Trueview. Please click on the thumbnail to download.

  • Fig. 1 - Standard Brick Veneer
  • Fig. 2 - Standard Internal Corner
  • Fig. 3 - Standard External Corner
  • Fig. 4 - Flat Soffit
  • Fig. 5 - Flat Soffit with Brick Mold
  • Fig. 6 - Concrete Slab & Foundation (Option 1: Min. Required for 1 & 2 Storey)
  • Fig. 7 - Concrete Slab & Foundation (Option 1: Standard Detail)
  • Fig. 8 - Overhanging Brick Veneer
  • Fig. 9 - Plastering of Concrete Base (AS)
  • Fig. 10 - Brick Veneer Below Ground
  • Fig. 11 - Plinth Base
  • Fig. 12 - Typical Wall Section
  • Fig. 13 - Brick Veneer on Concrete (AS)
  • Fig. 14 - Alternative Cavity Solution (AS) (Cavity less than 40mm)
  • Fig. 15 - Alternative Cavity Solution (AS) (Cavity Exceeding 75mm)
  • Fig. 16 - Deep Reveal - Jamb (Double Stud Framing)
  • Fig. 17 - Deep Reveal - Jamb (Using Packer)
  • Fig. 18 - Double Sided Brick (Option 1: External Walls Timber Floor)
  • Fig. 18A - Double Sided Brick (Option 2: External Walls Concrete Floor)
  • Fig. 19 - Double Sided Brick (Internal Walls Concrete Floor)
  • Fig. 19A - Double Sided Brick (Internal Walls Timber Floor)
  • Fig. 20 - Timber Floor (Option 1: Single Level)
  • Fig. 21 - Timber Floor (Option 2: Single Level)
  • Fig. 22 - Two Storey (Option 1: Ground Floor Veneer)
  • Fig. 23 - Two Storey (Option 2: Ground Floor Veneer)
  • Fig. 24 - Timber Floor (Mid-Floor 250 Bond Beam)
  • Fig. 25 - Internal Gutter/Brick (SD)
  • Fig. 26 - Window Head - Aluminium (AS)
  • Fig. 27 - Window Head - Timber
  • Fig. 28 - Window Head - Aluminium (Alternative Cladding Above)
  • Fig. 29 - Window Head (SD)
  • Fig. 30 - Bay Window Head (SD)
  • Fig. 31 - Greenhouse Window (SD)
  • Fig. 32 - Window head (AS) (Full Soldier Course)
  • Fig. 33 - Replacing 90mm Veneers with 70mm
  • Fig. 34 - Cover Jamb Flashing
  • Fig. 35 - Window Jamb - Aluminium
  • Fig. 36 - Window Jamb - Timber
  • Fig. 37 - Window Sill - Aluminium
  • Fig. 38 - Window Sill - Timber
  • Fig. 39 - Door Jamb - Aluminium
  • Fig. 40 - Brick Door Sill (AS)
  • Fig. 41 - Negative Soffit
  • Fig. 42 - Weatherboard to Brick 90degree Internal Corner
  • Fig. 43 - Weatherboard to Brick Parallel Junction
  • Fig. 44 - Sloping Parapet
  • Fig. 45 - Sloping Membrane Roof (SD)
  • Fig. 46 - Pergola Fixing
  • Fig. 47- Brick Columns Between Joinery
  • Fig. 48 - Reinforced Concrete/Concrete Block Column
  • Fig. 49 - Large Width Lintel - UB (SD)
  • Fig. 50 - Large Width Lintel - Channel (SD)
  • Fig. 51 - Head of Arch (Using Formwork)
  • Fig. 52 - Head of Arch (Brick Veneer using Angle)
  • Fig. 53 - Head of Arch (Double Veneer using Framework)
  • Fig. 53A - Head of Arch (Veneer & Slips)
  • Fig. 53B - Head of Arch (Brick Slips)
  • Fig. 54 - Veneer Over Openings (Using Shelf Angles )
  • Fig. 55 - Deck Connection (Option 1: Using 'H' Bracket)
  • Fig. 56 - Deck Connection (Option 2: Shelf Angle)
  • Fig. 57 - Deck Connection (Option 3: Using Plates & Bolts)
  • Fig. 58 - Attaching Lightweight Structures to Veneer (SD)
  • Fig. 59 - Parapet - External Veneer
  • Fig. 60 - Parapet Detail (SD) (Full Brick/Double Cavity/Shelf Angle)
  • Fig. 61 - Parapet - Metal Capping
  • Fig. 61A - Parapet Detail (Ventclad/Brick Slips or Veneer)
  • Fig. 62 - Brick Slips (Eterpan Corner Plan Detail)
  • Fig. 63 - Brick Slips (Eterpan Section Detail)
  • Fig. 64 - Garage Opening (Brick Slips on Eterpan)
  • Fig. 65 - Soffit End Detail
  • Fig. 66 - Window Head (Brick Slips on Eterpan)
  • Fig. 67 - Window Sill (Brick Slips on Eterpan)
  • Fig. 68 - Two Storey Veneer (Option 1: Concrete Mid-Floor)
  • Fig. 69 - Concrete Mid-Floor
  • Fig 70 - Wall at Side of Roof Slope (SD) (Secret Gutter Option)
  • Fig. 71 - Wall at Side of Roof Slope (SD) (Flashing Option)
  • Fig. 72 - Meter Box Head
  • Fig. 73 - Meter Box Sill
  • Fig. 74 - Typical Pipe Penetration
  • Fig. 75 - Shelf Angle (SD) (Hidden Joint Rebated Brick)
  • Fig. 76 - Shelf Angle Under Window (SD)
  • Fig. 77 - Top of Roof Slope (SD)
  • Fig. 78 - Top of Roof Slope (SD)
  • Fig. 79 - Wall at Side of Roof Slope (SD)
  • Fig. 80 - Enclosed Deck (SD)
  • Fig. 81 - Base of Sloping Shelf Angle - Plan View
  • Fig. 82 - Flat Soffit & 150mm Frieze Board
  • Fig. 83 - Cavity Wall (Maximum Recommended Height 1600mm)
  • Fig. 84 - Cavity Wall - High Wind Area
  • Fig. 85 - Single Wall Foundation
  • Fig. 86 - Typical Gate Post
  • Fig. 87 - Brick Column - Timber Post
  • Fig. 88 - Brick Column - Steel Post
  • Fig. 89 - Brick Column - Concrete Block Column
  • Fig. 90 - Brick Column - Timber Pile
  • Fig. 91 - Single Wall - Capping Options
  • Fig. 92 - Cavity Wall - Capping Options
  • Fig. 93 - Suggested Wall Plan Layouts
  • Fig. 94 - Bonding Patterns
  • Fig. 95 - Mortar Joints
  • Fig. 96 - Minimum Circle
  • Fig. 97 - Flat Segmental Circle
  • Fig. 98 - Piers & Returns
  • Fig. 99 - Soldier Courses
  • Fig. 100 - Corbelling
  • Fig. 101 - Special Shaped Bricks
  • Fig. 102 - Banding
  • Fig. 103 - Quoining (Corner Detailing)
  • Fig. 104 - Dog Toothing
  • Fig. 105 - Galvanised Steel Lintels
  • Fig. 106 - Examples of Window Shapes
  • Fig. 107 - Window Sill Options
  • Fig. 108 - Arches
  • Fig. 109 - Curve Formula
  • Fig. 110 - Arch Formula
  • Fig. 111 - Arch Formula (Tapered Bricks)
  • Fig. 112 - Detail Using Brick Slips
  • Fig. 113 - Block Retaining Wall
  • Fig. 114 - Timber Retaining Wall
  • Fig. 115 - Planter Box
  • Fig. 116 - Brick Edging

SCHIST DRAWINGS

Please note these files require Adobe Acrobat Reader or AutoCad software. They can be viewed in DWG Trueview. Please click on the thumbnail to download.

  • 120mm Rebate Foundation Detail
  • Door Sill Detail
  • External Corner Detail
  • Flat Soffit Detail
  • Flat Soffit and 150mm Frieze Board Detail
  • Flat Soffit With Timber Mould Detail
  • Garage Door Jamb Detail
  • Negative Soffit Detail
  • Typical Aluminum Window Jamb Detail
  • Vertical Cedar Internal Corner Detail
  • Joining to Weatherboard Wall Option 1 Detail
  • Joining to Weatherboard Option 2 Detail
  • Window Head - Option 1 Detail
  • Window Head - Option 2 Detail
  • Window Sill Aluminum
  • Internal Corner Detail
  • Designa Schist Plinth Detail
  • Typical Window Jamb - Aluminum Joinery Detail

E2-AS1 DRAWINGS

Please Note these drawings require Adobe Acrobat Reader Software. Please click on the thumbnail to download.

  • E2-AS1 - Fig.A&D - Masonry Ht 1 Storey
  • E2-AS1 - Fig.B&C - Masonry Ht 2 Storey
  • E2-AS1 - Fig.A-D - Masonry Ht Limitations
  • E2-AS1 - Fig.E-F-G - Window-Door Inst
  • E2-AS1 - Fig.E - Head Detail
  • E2-AS1 - Fig.F - Sill Detail
  • E2-AS1 - Fig.G - Jamb Detail
  • E2-AS1 - Fig.H - Door Sill Detail
  • E2-AS1 - Fig.H-I-J - Veneer Details
  • E2-AS1 - Fig.I - Floor Rebate Detail
  • E2-AS1 - Fig.J - Masonry Below Grd
  • E2-AS1 - Fig.K - Above Grd Support
  • E2-AS1 - Fig.K-L-M - Veneer Details
  • E2-AS1 - Fig.L - Soffit Detail
  • E2-AS1 - Fig.M - Cant Upper Flr Detail
ASK US!

If you cant find whats right for your project and need some advice we are happy to help!

At Midland Brick we have a team of brick experts at hand and chances are we have come across a situation like yours before.